Program Information
Imaging Dose Reduction and Scatter Removal in Cone Beam CT Via Random Undersampling: A Simulation Study
C Shen1*, L Chen2 , Y Xu3 , Z Tian4 , M Ng5 , T Zeng6 , Y Lou7 , L Zhu8 , X Jia9 , (1) Hong Kong Baptist University, Hong Kong, Hong Kong, (2) Hong Kong Baptist University, Hong Kong, Hong Kong, (3) Southern Medical University, Guangzhou, Guangdong, (4) UT Southwestern Medical Center, Dallas, Texas, (5) Hong Kong Baptist University, Hong Kong, Hong Kong, (6) Hong Kong Baptist University, Hong Kong, Hong Kong, (7) University of Texas Dallas, Dallas, Texas, (8) Georgia Institute of Technology, Atlanta, GA, (9) The University of Texas Southwestern Medical Ctr, Dallas, TX
Presentations
WE-G-207-8 (Wednesday, July 15, 2015) 4:30 PM - 6:00 PM Room: 207
Purpose: Cone-beam CT (CBCT) is widely used in image-guided radiation therapy. The high imaging dose from repeated uses is a clinical concern and its image quality is impeded by a large amount of scattered photons. We propose to solve these two problems via a random undersampling method. We have performed Monte Carlo (MC) simulation studies for an initial test of the method.
Methods: We propose to place a moving beam blocker with a random blocking pattern in front of the x-ray source. It blocks a projection with a random pattern, which varies among projections. Scatter signal is measured in the deliberately created shadows, which is further interpolated to the entire projection. After removing the interpolated scatter from the total signal in the un-blocked area, the cleaned data were used for CBCT reconstruction under a Tight Frame (TF) based iterative method. The random sampling yields a projection matrix that has a better numerical property compared to regular undersampling, permitting better image reconstruction.
Results: 360 CBCT projections of a head-and-neck cancer patient were generated via MC simulations. We first reconstructed CBCTs using 90 full projections with only primary data. The RMS error was 16%. When scattered photons were included in the projection, reduced contrast was observed and the RMS error was 22%. In our proposed method, 360 projections were used, but each of them was randomly blocked by 75% of pixels. Scatter estimation and was performed and the corrected data were used in reconstruction, yielding a reconstruction error of 15%. In these two approaches, the imaging doses were both reduced by ~75% compared to a full scan with 360 unblocked projections.
Conclusion: we proposed a method to solve the imaging dose and scatter problem in CBCT in a unified manner. Preliminary simulation studies demonstrated its efficacy.
Contact Email: