Encrypted login | home

Program Information

Proton Pencil Beam Scanning for Mediastinal Lymphoma: 4-Dimensional Feasibility Study


C Zeng

C Zeng*, J Plastaras , Z Tochner , C Hill-Kayser , S Hahn , S Both , Univ Pennsylvania, Philadelphia, PA

Presentations

SU-E-T-267 Sunday 3:00PM - 6:00PM Room: Exhibit Hall

Purpose: To assess the feasibility of proton pencil beam scanning (PBS) for the treatment of mediastinal lymphoma.

Methods: A group of 6 patients were planned using an anterior field with PBS. Spots with ~5 mm σ were used for all patients, while large spots (~10 mm σ) were employed for patients with motion perpendicular to the beam (≥5 mm). We considered volumetric repainting such that, in each fraction, the same field would be delivered twice. Four-dimensional dose was calculated on initial and verification 4-dimensional computed tomography (4D-CT) scans (2—3) based on respiratory trace and beam delivery sequence. This was implemented by binning the spots into separate plans on each 4D-CT phase respectively. Four starting phases were sampled for each painting and 4 energy switching times (0.5 s, 1 s, 3 s, and 5 s) were tested, resulting in 2560 dose distributions for the cohort. Plan robustness was measured for target and critical structures in terms of the percentage difference between delivered dose and planned dose.

Results: For 5 of the 6 patients, the ITV (internal target volume) D98% was degraded by <3% (standard deviations ~ 0.1%) when averaged over the whole course (up to 5% per fraction). Deviations of mean lung dose, heart maximum dose, and cord maximum dose were within 5% of prescribed dose. For one patient with motion perpendicular to the beam (up to 5 mm), the degradation of ITV D98% was 9% over the whole course (12% per fraction), which was mitigated to 1% (3% per fraction) by employing large spots and repainting. No significant difference in coverage was observed for different energy switching times.

Conclusion: This feasibility study demonstrates that, for mediastinal lymphoma, the PBS plan robustness can be maintained during delivery when target motion is measured and volumetric repainting and/or large spots are employed.

Funding Support, Disclosures, and Conflict of Interest: This work was supported by Ion Beam Application.


Contact Email: